Need help on my C5R build up
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 438
Likes: 0
From: Istanbul
Need help on my C5R build up Hi to all;
I need your opinions on my new engine set up :
Budget : 14 to max 16.000$
Target : Very good idle,strong and reliable engine that runs on pump gas(No race gas allowed)
Target hp/tq: 580-600 rwhp 550-600 tq
Basicly car haves everythink : LT headers free flow exhaust ,ATI blower(Complete ATI kit twin intercoolers 48 lb injectors),engine oil cooler,BBK TB,TNT Nos system(Just for show),Racetronix fuel pump and booster,LS6 intake and lots of other thinks....
Thinking to buy :
1- C5R Block
2- Stage II style heads for FI
3- Blower cam(115 or 116 lobe center for near stock idle)+lifters+Katech chain
4-Ported oil pump
5-Lunati 383 stroker kit for FI pistons
And other parts such as : ARP s,rod,main bearings(Are they come with the stroker kit?)
Please tell me you opinions about the parts and my target + about the total amount: Am i day dreaming?
I need your opinions on my new engine set up :
Budget : 14 to max 16.000$
Target : Very good idle,strong and reliable engine that runs on pump gas(No race gas allowed)
Target hp/tq: 580-600 rwhp 550-600 tq
Basicly car haves everythink : LT headers free flow exhaust ,ATI blower(Complete ATI kit twin intercoolers 48 lb injectors),engine oil cooler,BBK TB,TNT Nos system(Just for show),Racetronix fuel pump and booster,LS6 intake and lots of other thinks....
Thinking to buy :
1- C5R Block
2- Stage II style heads for FI
3- Blower cam(115 or 116 lobe center for near stock idle)+lifters+Katech chain
4-Ported oil pump
5-Lunati 383 stroker kit for FI pistons
And other parts such as : ARP s,rod,main bearings(Are they come with the stroker kit?)
Please tell me you opinions about the parts and my target + about the total amount: Am i day dreaming?
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 438
Likes: 0
From: Istanbul
Re: Need help on my C5R build up thechef:'i would get a bigger stroker kit if i were you' : Susch as? I have a great deal for a Lunati kit thats why i choose their kit.How much is the others? Brand?
Launching!
Joined: Jan 2002
Posts: 281
Likes: 0
From: Sydney Australia
Re: Need help on my C5R build up Wont the stroker kit have the wrong pistons you would be looking at a set of custom pistons for the larger 4.125 bore with the C5R block also should be looking at a set of custom pistons to lower your compression ratio ? dont the stroker kits run around 10.8 CR ?
<small>[ November 08, 2002, 08:05 PM: Message edited by: strife ]</small>
<small>[ November 08, 2002, 08:05 PM: Message edited by: strife ]</small>
TECH Enthusiast
Joined: Sep 2002
Posts: 658
Likes: 0
From: Clinton Twp. Michigan
Re: Need help on my C5R build up Hey Mert! It's Jason from Detroit, about this whole C-5R thing, i was gonna do the same thing, and have most of the parts still, and obviously since i am not going to do it, have these parts, that i would sell ya, about the lunati kit, if you can get them to make you low compression pistons for the 4.125 bore cool, but if not, i got a set of custom ones from Diamond racing, to be used with the lunati crank, which i already sold, and the C-5R block, i'll give them both to you for $6,000 then you could still buy the lunati kit, just shelf or sell the pistons, or sell them. If you are interested, email me, and we can figure things out. I also have a set of C-5R heads, off a real C-5R race car, that are pending a sale right now.
Jason
Jason
TECH Fanatic
iTrader: (1)
Joined: Oct 2002
Posts: 1,851
Likes: 0
From: Elmhurst, IL (Chicago Suburb)
Re: Need help on my C5R build up If you don't mind telling, how much would one expect to pay from a private party for C5R used Racing heads? How much more power would these heads make over the best vendor's stage III race prepped LS6 heads on a 422+ superstroker?
If you don't want to go public with the $ questions please email me as i could be interested if you sale on the heads fall thru.
Thanks,
MTI 427 Roadster <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
If you don't want to go public with the $ questions please email me as i could be interested if you sale on the heads fall thru.
Thanks,
MTI 427 Roadster <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 438
Likes: 0
From: Istanbul
Re: Need help on my C5R build up strife : Yes but i can order a kit for much lower com.ratio pistons.Yes as far as i know they are between 10.8 and 11.1 CR.Looks like custom pistons is the best way to go.
Hey Jason how are you <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> You have mail!
Hey Jason how are you <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> You have mail!
