Damn it....need a little help here...
Thread Starter
Launching!
Joined: Nov 2001
Posts: 203
Likes: 0
From: Chesapeake, VA
Damn it....need a little help here... Snaped about 1/4" of the front passenger side intake manifold bolt in the head. Look like I am going to have to drill and tap this baby out. Never done this before. I need some advice on what to do, what NOT to do. Please help me save a set of very expensive Stage 2 heads! Also, I am now wondering if I am torquing these bolts to the right amount...can someone dig up a number for me? TIA.
-Kris
-Kris
Launching!
Joined: Dec 2001
Posts: 231
Likes: 0
From: Houston, Texas F-Body Heaven!!!
Re: Damn it....need a little help here... First pass - 44 in-lbs
Second pass - 89 in-lbs
Sequence:
Psngr/Driver
Side Side
8 / 9
5 / 3
1 / 2
4 / 6
10 / 7
Hope this helps. Courtesy Haynes Manual. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
'Los
<small>[ November 13, 2002, 11:51 PM: Message edited by: Carlitos ]</small>
Second pass - 89 in-lbs
Sequence:
Psngr/Driver
Side Side
8 / 9
5 / 3
1 / 2
4 / 6
10 / 7
Hope this helps. Courtesy Haynes Manual. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
'Los
<small>[ November 13, 2002, 11:51 PM: Message edited by: Carlitos ]</small>
Thread Starter
Launching!
Joined: Nov 2001
Posts: 203
Likes: 0
From: Chesapeake, VA
Re: Damn it....need a little help here... Ouch, I was trying to torque those guys to 12 ft-lbs...no wonder that bolt snapped. These bolts have been tightened multiple times too, have had the intake off the car 4 or 5 times now.
<small>[ November 14, 2002, 12:12 AM: Message edited by: 99WhiteSS ]</small>
<small>[ November 14, 2002, 12:12 AM: Message edited by: 99WhiteSS ]</small>
