Problems installing springs
Thread Starter
Teching In
Joined: Dec 2006
Posts: 13
Likes: 0
Problems installing springs I got my cam in and now im working on the springs. I came across a problem trying to get them on and off. I have a couple of spring compressors but they work like ****. Anybody have any advice? And with the compressors i have, getting to the back ones will be almost impossible. Do i need that More tool from Thunder racing to get this done?
i take it they are the dual valve springs and ur using the "autozone" tool.....It will work it just takes patients, beleive me, we used it to do the duals springs on my friends car with the MS4.
I Bought A Valve Spring Compressor Off E-bay From Seller Tpispeicalties For $55.00 + Shipping. Same Compressor You Can Buy For $100.00 + Other Places. I Was Very Satisfied. I Actually Just Used It And Finished My Head/cam Swap A Hour Ago And It Made Things Pretty Easy.
Trending Topics
I used the Moore tool, and a plastic straw to find TDC.
Make sure you have a magnet tool to catch the locks. Some Loc tite or greese to hold the locks in place.
Start with passanger side...
Make sure you have a magnet tool to catch the locks. Some Loc tite or greese to hold the locks in place.
Start with passanger side...
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
I'm in the middle of a spring swap right now... MS4 and PRC duals. I gave up with my shitty tool and bought the Crane. That thing is great. Trouble is I got halfway done and had one of the friggin' valve locks disappear. (see thread) Anyway, I highly recommend the Crane tool. I was using basically a homemade version of the Larry tool.
Thread Starter
Teching In
Joined: Dec 2006
Posts: 13
Likes: 0
Thanks guys. I actually wrote this and then did some searching and found other people liked the Crane tool as well. I had the Crane tool overnighted the same day i wrote this thread. $99 for the tool and $140 total overnighted. It worked awesome. I dont think there is any other tool that i could have used that would have done a better job.
