CHECK MY MATH PLEASE!! lifters
CHECK MY MATH PLEASE!! lifters ok guys got my pushrod length checker and just want to be sure my math is correct. if so I am WAY off now!!
9 turns = .050 x 9 = .45
+
pushrod checker = 6.8
+
preload .075
= 7.325
I currently am running mti stage 2e milled .10, stock gaskets. ls7 lifters and a custom speed demon cam 230/236 592 602 on a 114 +4 dont know the base circle.
My current pushrods are 7.425!! lol think my lifters are bottoming out!! luckily it hasnt been driven yet!
9 turns = .050 x 9 = .45
+
pushrod checker = 6.8
+
preload .075
= 7.325
I currently am running mti stage 2e milled .10, stock gaskets. ls7 lifters and a custom speed demon cam 230/236 592 602 on a 114 +4 dont know the base circle.
My current pushrods are 7.425!! lol think my lifters are bottoming out!! luckily it hasnt been driven yet!
Im freakin tired of buying special tools... I think ill just trust the freakin tool...
im prob just gonna go buy the thunder 7.35 PR and call it good.
how do you do a swipe test?
im prob just gonna go buy the thunder 7.35 PR and call it good.
how do you do a swipe test?
