Cam suggestions for a 382 Stroker.
#6
Thread Starter
Restricted User
iTrader: (43)
Joined: Nov 2001
Posts: 2,669
Likes: 0
From: Pittsburgh, PA
Re: Cam suggestions for a 382 Stroker.
I want something with some lope to it but don't want stalling out issues. I think the TR230 will be a little small and with the stroker I don't want a reverse split. What are the specs on the G5-X2? I think I will be looking more in the range of the R1 or just a tad bigger. How is the idle and drivability if the R1 in a 382 Stroker???
Trending Topics
#9
Re: Cam suggestions for a 382 Stroker.
I had a 224/224 in my 382 stroker and it was WAY too small, idled like stock.
I have a 236/232 .602 .575 112lsa in it now. picked up about 10hp/tq and has a great idle. I'll try to get up a sound clip. Very nice lope to it and no surging problems.
I have a 236/232 .602 .575 112lsa in it now. picked up about 10hp/tq and has a great idle. I'll try to get up a sound clip. Very nice lope to it and no surging problems.
#10
Re: Cam suggestions for a 382 Stroker.
StevieZ... How does the 232/232 idle and how are the street manners??? M6 or A4??? Is that a regular comp grind???
#13
Thread Starter
Restricted User
iTrader: (43)
Joined: Nov 2001
Posts: 2,669
Likes: 0
From: Pittsburgh, PA
Re: Cam suggestions for a 382 Stroker.
I was thinking 236/236 lift around .581 on a 112 LSA. I feel it will idle better than a 236/240 split. I am going to order something by the end of the week.
#14
Thread Starter
Restricted User
iTrader: (43)
Joined: Nov 2001
Posts: 2,669
Likes: 0
From: Pittsburgh, PA
Re: Cam suggestions for a 382 Stroker.
383SS Nice web site. Any problems with that .600 lift cam and 918 springs??? That is sort of pushing the envelope. How high of a lift can you go with 918's and not have to worry??? Also how much are your heads milled??? What length push rods?