Got my Heads (pics)
05-22-2007, 06:46 PM
#23
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Alright guys, they have been sent out. There is no way I'd refuse an offer like that.
I'll be sure to make a thread here to post up before and after pics.
Huge thanks again to Gunnar and Patriot Performance for the generosity.
I'll be sure to make a thread here to post up before and after pics.
Huge thanks again to Gunnar and Patriot Performance for the generosity.
Above and beyond....
05-23-2007, 10:42 PM
#26
Originally Posted by Gunnar@Patriot
Couple of things for you to consider: You are assuming that these heads are Stage III 64cc chambers. In the past, we only created a 59cc chamber in the Quench style heads.
Secondly, to verify these heads are what you think they are, why don't you send them to us and we will check the exact chamber sizes.
Bonus - From time to time we like to choose a customer that we can help out by going above and beyond what is expected. With this in mind, we offer you the opportunity to send these used heads into us and we will go through these heads completely and install new guides, valves, and springs - ALL at No Charge. While we have them here, they will get our latest valve job design and milling. We will verify all the information about these heads. All that we ask, is that you take some 'before and after' pics and that you be patient because the lead time on this will be about 3-4 weeks - due to existing work load.
As we said, we like to do this to show our commitment to providing the best customer service possible. Please take some Before and After pics.
Any questions, give me a call. Here's your chance.
Secondly, to verify these heads are what you think they are, why don't you send them to us and we will check the exact chamber sizes.
Bonus - From time to time we like to choose a customer that we can help out by going above and beyond what is expected. With this in mind, we offer you the opportunity to send these used heads into us and we will go through these heads completely and install new guides, valves, and springs - ALL at No Charge. While we have them here, they will get our latest valve job design and milling. We will verify all the information about these heads. All that we ask, is that you take some 'before and after' pics and that you be patient because the lead time on this will be about 3-4 weeks - due to existing work load.
As we said, we like to do this to show our commitment to providing the best customer service possible. Please take some Before and After pics.
Any questions, give me a call. Here's your chance.
05-25-2007, 09:01 PM
#34
Registered User
Join Date: May 2007
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Crash, total with shipping... $1130... gold springs.. cnc ported.. goto their page and hit the "new products" link at the top.. its a pretty awesome deal.. last from what i have seen.. the price for what you get is damn good
