Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

lifter problem

Thread Tools
 
Search this Thread
 
Old May 26, 2007 | 01:48 PM
  #1  
WHITExREAPER's Avatar
Thread Starter
Staging Lane
iTrader: (4)
 
Joined: Jul 2006
Posts: 63
Likes: 0
From: Pittsburgh,PA
Default lifter problem

I ordered a set of lifters. The stock lifters had the hole for the oil to get into them on the bottom. Now the ones that got sent to me have the hole on the side and i would like to know which way to face the hole to the left or the right. Or did they send me the wrong lifters? They are suppost to be gm hp hydro lifters.
Reply
Old Jun 1, 2007 | 05:56 PM
  #2  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default

Moved from Advanced Tech.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply




All times are GMT -5. The time now is 09:10 PM.