View Poll Results: Should I swap 241's for my 803's
YES
6
30.00%
NO, not worth the money
14
70.00%
Voters: 20. You may not vote on this poll
241 heads worth swapping over 803's during street cam install
#22
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Tempe, Arizona
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GR33N GoblinM6
i just changed my 806 heads for a pair of milled 241 heads.. milled them .028.. did some slight portwork on the intake and exhaust runners.. bumped the compression up to 10.7.1
the 806 castings are 69cc's and the 241's are 67cc stock..
the 806 castings are 69cc's and the 241's are 67cc stock..
how did you like this?? worth doing?? also i didn't know 241's would bump compression. How would bumping compression help drivibility? I would think it would increase detonation?
#23
TECH Enthusiast
iTrader: (3)
Join Date: Jun 2004
Location: Chino Hills, CA
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
LS1TORQ - He had them milled. Milling increasing the compression. Otherwise 241 heads shouldn't change the compression. If you want a slight upgrade without breaking the bank. 243 heads can be had on eBay for $400-$600 dollar depending if they're new/used whatever. Then you might see 15-20hp because you're picking up a little bit of flow and about half a point of compression.
PS - there is a set ending in a day or so.
PS - there is a set ending in a day or so.