Torquer v3 is in....
On The Tree
Joined: Jul 2007
Posts: 146
Likes: 0
From: Borger,TX
I just got my Torquer V.3 installed in my 02 T/A M6 i git it dyno-tuned next monday and im hoping to put 400 to the ground from the looks of it i may b able to and if not i'll come pretty close.....other mods are Pacesetter Long tubes, TSP ORY, let me know if any of u want a sound clip of the Torquer V.3 i have one i recorded myself.
Staging Lane
Joined: Feb 2007
Posts: 64
Likes: 0
From: Washington DC
Originally Posted by Fratsit
Thats right in the ballpark that I made.
Great numbers by the way. The T3 is TSP's best kept secret.
R/
Frat
Great numbers by the way. The T3 is TSP's best kept secret.
R/
Frat
Sorry for the thread hijack LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Blacksheep, what heads are you running with your setup? Did you have to flycut or do anything special to install this cam?
I am cam shopping and curious at this point. I would like to hit 400 RWHP and TQ. But, I will be using 243 heads stock for the mean time.
I am cam shopping and curious at this point. I would like to hit 400 RWHP and TQ. But, I will be using 243 heads stock for the mean time.
Originally Posted by Eddie 70
Blacksheep, what heads are you running with your setup? Did you have to flycut or do anything special to install this cam?
I am cam shopping and curious at this point. I would like to hit 400 RWHP and TQ. But, I will be using 243 heads stock for the mean time.
I am cam shopping and curious at this point. I would like to hit 400 RWHP and TQ. But, I will be using 243 heads stock for the mean time.
Thread Starter
12 Second Club
iTrader: (3)
Joined: Sep 2006
Posts: 171
Likes: 0
From: Greenville, NC
Originally Posted by Eddie 70
Blacksheep, what heads are you running with your setup? Did you have to flycut or do anything special to install this cam?
I am cam shopping and curious at this point. I would like to hit 400 RWHP and TQ. But, I will be using 243 heads stock for the mean time.
I am cam shopping and curious at this point. I would like to hit 400 RWHP and TQ. But, I will be using 243 heads stock for the mean time.
I'd like to hear the sound clip as I'm looking at getting that cam, Pacesetters & the TSP ORY so I'd basically be hearing what my car will sound like. 
Originally Posted by 02 T/A 984
I just got my Torquer V.3 installed in my 02 T/A M6 i git it dyno-tuned next monday and im hoping to put 400 to the ground from the looks of it i may b able to and if not i'll come pretty close.....other mods are Pacesetter Long tubes, TSP ORY, let me know if any of u want a sound clip of the Torquer V.3 i have one i recorded myself.
Thread Starter
12 Second Club
iTrader: (3)
Joined: Sep 2006
Posts: 171
Likes: 0
From: Greenville, NC