please help with problem
Thread Starter
Banned
Joined: May 2007
Posts: 43
Likes: 0
From: ocean city
please help with problem i installed a hp turbo kit its a gt45r 75 lbs injectors with magnafuel pump on my 408 stroker now that i got it done i have codes being thrown here they are
U1301 - Class 2 Short to Battery
U1016 - Loss of Class 2 Communication with VCM
U1040 - Loss of Class 2 Communications with ABS
U1096 - Loss of Communications with IPC
and a camshaft position sensor circuit high and low
when i delete the codes all come back immediately. except for the throttle position sensor. when i start the car it runns good for hte first ten seconds then my tach drops down and the cam shaft position sensor circuit high and circuit low come back. i have checked all fuses and wires and all grounds. please help thanxs
U1301 - Class 2 Short to Battery
U1016 - Loss of Class 2 Communication with VCM
U1040 - Loss of Class 2 Communications with ABS
U1096 - Loss of Communications with IPC
and a camshaft position sensor circuit high and low
when i delete the codes all come back immediately. except for the throttle position sensor. when i start the car it runns good for hte first ten seconds then my tach drops down and the cam shaft position sensor circuit high and circuit low come back. i have checked all fuses and wires and all grounds. please help thanxs
