Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

224r or 228r and what all do I need?

Thread Tools
 
Search this Thread
 
Old 09-11-2007 | 02:37 PM
  #1  
SPL's Avatar
SPL
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: Nov 2005
Posts: 98
Likes: 1
From: Burleson, TX
Default 224r or 228r and what all do I need?

I've decided to finally bite the bullet and and upgrade my cam. My car is a daily driver and I drive in a lot of stop and go traffic so driveability is a major concern for me. I have a 3400 stall and boltons. Would a 228r be too big for me? What all do I need for cam like this? Springs? Timing chain?
Old 09-11-2007 | 03:37 PM
  #2  
homerunhtr21's Avatar
TECH Fanatic
iTrader: (18)
 
Joined: Jan 2007
Posts: 1,286
Likes: 1
From: Alabama
Default

I just order the 228r from Texas-Speed they have a cam package that you can get http://texas-speed.com/shop/item.asp...d=174&catid=49. Also you should get an Ls6 oil pump (stock or ported) and an Ls2 timing chain. If you want better driveability get the 114 , I got the 112 and I am also a DD but either one should be fine.
Old 09-11-2007 | 03:47 PM
  #3  
transamfreak01's Avatar
TECH Fanatic
iTrader: (8)
 
Joined: Jan 2006
Posts: 1,782
Likes: 0
Default

yeah i meen the 224 or the 228 will both perform great w/ your converter and all the bolt ons... same thing as homerun said, springs, retainers pushrods, oil pump (ls6 ported) ls2 timing chain.




All times are GMT -5. The time now is 06:13 AM.