Thunder Racing forged 346ci solid roller - 460hp/418tq
#41
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
sweet results Jason. I know youre gonna have fun with it.
Dont be surprised to be hearing from me in a few weeks regarding something a lil stouter for my car...............
Dont be surprised to be hearing from me in a few weeks regarding something a lil stouter for my car...............
#42
Thread Starter
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
Thanks again for the compliments guys!
The lash needs to be adjusted periodically. It is a good idea to check them after the first 100 miles and then again every 6-7k miles. They should not loosen up much, if any, between that time frame.
Mark, I'm using a 28" M/T Et Drag. I could not get the car to consitently hook on the 26" Drags. If I could have, I would would have stayed with the 26"/4.30 combo. I still would like this setup to peak a few hundred rpms higher, but it will do for now until I have time to swap cam. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I don't have any planned trips to Hattiesburg now, but Justin and I will probably make a trip in the coming weeks.
The lash needs to be adjusted periodically. It is a good idea to check them after the first 100 miles and then again every 6-7k miles. They should not loosen up much, if any, between that time frame.
Mark, I'm using a 28" M/T Et Drag. I could not get the car to consitently hook on the 26" Drags. If I could have, I would would have stayed with the 26"/4.30 combo. I still would like this setup to peak a few hundred rpms higher, but it will do for now until I have time to swap cam. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I don't have any planned trips to Hattiesburg now, but Justin and I will probably make a trip in the coming weeks.
#43
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
Awesome numbers Jason! I was so glad the assembly and install went so smoothly this time. It was truely awesome to hear that thing fire up and run so good from the start. Also, it was one totally F*%&ing awesome ride. That thing pulls like a scalded dog!!! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Ok. Now that you have graduated to undisputed Dyno *****, <img border="0" alt="[pimp]" title="" src="graemlins/gr_pimp.gif" /> it's time to get my load back on the road... Save the 12 packs for my Friday noght bash. I stopped at AJ's today and noticed the following:
1) Darton MID Sleeved block with my name on it.
1) Lunati 4" stroke LS1 crank.
8) Lunati Pro Billet Ultralite rods.
8) Custom Ultralite 4.125" Diamond Pistons.
All I need now are my heads, a BIG A$$ cam and a little free time... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I know I can count on you for one of those Friday night thrashes and a couple of 12 packs... <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Again congrats bud. I expect some mid 10 sec time slips on Sat morning! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Shane
Ok. Now that you have graduated to undisputed Dyno *****, <img border="0" alt="[pimp]" title="" src="graemlins/gr_pimp.gif" /> it's time to get my load back on the road... Save the 12 packs for my Friday noght bash. I stopped at AJ's today and noticed the following:
1) Darton MID Sleeved block with my name on it.
1) Lunati 4" stroke LS1 crank.
8) Lunati Pro Billet Ultralite rods.
8) Custom Ultralite 4.125" Diamond Pistons.
All I need now are my heads, a BIG A$$ cam and a little free time... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I know I can count on you for one of those Friday night thrashes and a couple of 12 packs... <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Again congrats bud. I expect some mid 10 sec time slips on Sat morning! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Shane
#44
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
bad *** jason, I knew that car was gonna make some good hp. Cant wait to see it tuned and and turning some mid 10s. Put a real cam in that thing and its gonna be nasty. <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
#45
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
Congrats on a sucessfull set up now go get that 10 sec time slip <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
#46
Thread Starter
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
Shane, hopefully your block will be back for assembly very soon. The heads hopefully will be finished before the block is done. Pick and a cam and then let's put it together. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Tim, get your car back on the road. I need to beat you finally.. after 3 years!! <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
Tim, get your car back on the road. I need to beat you finally.. after 3 years!! <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
#48
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Jason99T/A:
<strong> Tim, get your car back on the road. I need to beat you finally.. after 3 years!! <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">BAH!!!! You will choke...AGAIN... <img border="0" alt="[boring]" title="" src="graemlins/gr_zzz.gif" /> <img border="0" alt="[barf]" title="" src="graemlins/gr_barf.gif" /> <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" /> <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" /> <img border="0" alt="[cry]" title="" src="graemlins/gr_cry.gif" /> <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" />
<strong> Tim, get your car back on the road. I need to beat you finally.. after 3 years!! <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">BAH!!!! You will choke...AGAIN... <img border="0" alt="[boring]" title="" src="graemlins/gr_zzz.gif" /> <img border="0" alt="[barf]" title="" src="graemlins/gr_barf.gif" /> <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" /> <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" /> <img border="0" alt="[cry]" title="" src="graemlins/gr_cry.gif" /> <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" />
#49
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
Man I just went and drove the car. Holy crap this things runs. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Thanks for the drive Jason. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Can't wait to see what mine will feel like with an extra 28 cubic inches. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thanks for the drive Jason. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Can't wait to see what mine will feel like with an extra 28 cubic inches. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#50
Thread Starter
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
The 5-point harness is installed, so it's time to go racing. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> I'm planning on heading to NPR tomorrow after school for a few shakedown passes. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
Jason
#51
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
A little birdie just told me Jason has gone 10.74 @ 128.9 tonight on his 3rd pass...
KICK A$$ JASON!!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
<small>[ February 05, 2003, 09:18 PM: Message edited by: XtraCajunSS ]</small>
KICK A$$ JASON!!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
<small>[ February 05, 2003, 09:18 PM: Message edited by: XtraCajunSS ]</small>
#52
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
<img border="0" alt="[gruffy cottonball]" title="" src="graemlins/gr_gruffy.gif" /> <img border="0" alt="[gruffy cottonball]" title="" src="graemlins/gr_gruffy.gif" /> <img border="0" alt="[gruffy cottonball]" title="" src="graemlins/gr_gruffy.gif" />
#53
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
Dam-mit, those birdies! Sweeet!
Hey Jason, can you build me one of those motors too? <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Maybe pep it up a bit? <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
-Andrew
Hey Jason, can you build me one of those motors too? <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Maybe pep it up a bit? <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
-Andrew
#54
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
Actually that little birdie just sang again...Jason now has the fastest N.A. 346 M6 or A4 in E.T. and MPH of anyone on this board. The proof is in the track times...Jason will give the details later.
#55
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
BAD *** jason! i see it's doing MUCH better than you expected it to do! anyway, sweet *** setup man, where's my VHS tape <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
hehe
laters
Nitin
hehe
laters
Nitin
#56
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by XtraCajunSS:
<strong> A little birdy just told me Jason has gone 10.74 @ 128.9 tonight on his 3rd pass...
KICK A$$ JASON!!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Jeebus!! That is hauling it for a 346 cube M6 all motor. Almost 130 MPH. Yowza.
<strong> A little birdy just told me Jason has gone 10.74 @ 128.9 tonight on his 3rd pass...
KICK A$$ JASON!!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Jeebus!! That is hauling it for a 346 cube M6 all motor. Almost 130 MPH. Yowza.
#57
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
WOW! SWEET! BAD TO THE BONE! <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" />
Iam calling your cell. I want details. <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />
Coach
Iam calling your cell. I want details. <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />
Coach
#58
Re: Thunder Racing forged 346ci solid roller - 460hp/418tq
That little birdy just told me 10.65. <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" /> <img border="0" alt="[angel]" title="" src="graemlins/gr_angel.gif" />
Coach
Coach