guyz with 408 strokers
12-02-2007, 12:51 AM
#1
TECH Fanatic
Thread Starter
Join Date: Jun 2006
Location: Hayward CA
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
guyz with 408 strokers people with 408strokers
--------------------------------------------------------------------------------
what cam and what stall are yall running
or what cam do yall recommend
--------------------------------------------------------------------------------
what cam and what stall are yall running
or what cam do yall recommend
12-02-2007, 11:09 AM
#2
On The Tree
Join Date: Mar 2006
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
TSP MS3 or MS4. MS4 lifts higher & has higher powerband. Both need upgraded valve springs, and you might want to also consider stronger rocker arms & lifters, better oil pump & timing chain.
Both will need tuning.
Both will need tuning.
12-02-2007, 08:53 PM
#5
iTrader: (3)
Join Date: Jul 2004
Location: Indianapolis, IN
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
T-REX here...242/248 608/612 on a 110 LSA. Through a M6 with a 4.10 geared 12 bolt. Never been to the track...just a result of wretched excess. Loads of fun...scares anyone within 1/2 mile when fired
Trending Topics
12-03-2007, 01:50 AM
#10
TECH Fanatic
Thread Starter
Join Date: Jun 2006
Location: Hayward CA
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
well imma be puttin this 408 in my truck with l92 heads l92 manifold so thats why im tryna get an idea if i should go wit a bigger cam than listed in my mods
12-03-2007, 05:13 AM
#11
On The Tree
iTrader: (10)
Join Date: Jul 2005
Location: bay area
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
yes your gonna wanna get a new cam. that cam is way to small for a 408. u should talk to someone and have them spec you out a cam. it all depends on what you want outta your setup. but a 224 cam is not gonna be good in a 408
12-03-2007, 08:29 AM
#14
9 Second Club
iTrader: (7)
Join Date: May 2005
Location: Cabot, AR
Posts: 3,126
Likes: 0
Received 0 Likes
on
0 Posts
I would let Patrick G spec you out one. You have to take into consideration the weight of the vehicle, converter size, and engine specs like compression, flow numbers for the heads etc. What are your goals with it?? Those are all things Patrick G takes into consideration. Well worth $25 for him to hook you up.
12-03-2007, 09:43 AM
#19
TECH Fanatic
Thread Starter
Join Date: Jun 2006
Location: Hayward CA
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
well i quoted close to 6500
3700 for a 408
2200 for the Cylinder Head and Manifold Package, SLP/L92 Drive by Wire (64cc)
.. well my goals is to basically due a killer street truck.. and to see some strip in the summer. the guy said expect 530 rwhp on all motor and then i told him bout the nitrous kit i got and he said safley u can run a 200 shot ..and another goal is to run either a procharger o a sts turbo my mid late summer
3700 for a 408
2200 for the Cylinder Head and Manifold Package, SLP/L92 Drive by Wire (64cc)
.. well my goals is to basically due a killer street truck.. and to see some strip in the summer. the guy said expect 530 rwhp on all motor and then i told him bout the nitrous kit i got and he said safley u can run a 200 shot ..and another goal is to run either a procharger o a sts turbo my mid late summer
