Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Anyone running Vinci XXX Cam?

Thread Tools
 
Search this Thread
 
Old 12-06-2007 | 02:21 AM
  #1  
corvet786c's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: May 2005
Posts: 1,410
Likes: 11
From: Port St. Lucie, Fl
Default Anyone running Vinci XXX Cam?

Just wanted to know if anyone is running this cam with stock heads and what were your dyno numbers.
Old 12-06-2007 | 08:38 AM
  #2  
MJD's Avatar
MJD
12 Second Club
iTrader: (1)
 
Joined: Aug 2005
Posts: 255
Likes: 0
From: Greenville, OH
Default

On stock heads I was running 377RWHP and 358RWTQ. This was on a poor tune though. I have since added heads. See sig.
Old 12-06-2007 | 11:51 AM
  #3  
corvet786c's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: May 2005
Posts: 1,410
Likes: 11
From: Port St. Lucie, Fl
Default

cool because that is my same dyno too on there #56 cam. Do you like the XXX Cam is it strong up top?
Old 12-06-2007 | 02:24 PM
  #4  
MJD's Avatar
MJD
12 Second Club
iTrader: (1)
 
Joined: Aug 2005
Posts: 255
Likes: 0
From: Greenville, OH
Default

Since I added heads and a new tune it has been awesome. Before it felt real weak on the low end but I think a lot of that had to do with the tune. I have no issues with it now, has more power off idle and screams up top. In my sig is my dyno sheet, what I really like about it is you don't have to rev to 6500 to get power. By 3000 rpm I'm already making 365 ft/lbs of torque. I wanted a solid street car that will make an occasional trip down the 1/4 mile and autocross track. I think the car would do very well on a road course as well. I got that with 0 drivability issues and excellent power. I don't know what your looking to do with the car but if you like how it drives now skip the cam swap and put that money toward heads.



Quick Reply: Anyone running Vinci XXX Cam?



All times are GMT -5. The time now is 04:29 PM.