need a scr check (seems high)
#1
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
need a scr check (seems high)
I just ran it through a dcr calculater and it is saying 11.80 static
stock ls1 lower .040 cometics and 59cc afr's
if someone could verify if that is right would be a help
thanks,
mike
stock ls1 lower .040 cometics and 59cc afr's
if someone could verify if that is right would be a help
thanks,
mike
#3
TECH Fanatic
iTrader: (12)
Join Date: Oct 2006
Location: Orlando, FL
Posts: 1,724
Likes: 0
Received 0 Likes
on
0 Posts
11.84 is wrong according to this calculator.
I got 11.4:1.
http://www.c5frc.com/calculators/Com...Calculator.htm
I got 11.4:1.
http://www.c5frc.com/calculators/Com...Calculator.htm
#4
On The Tree
iTrader: (8)
Join Date: Dec 2003
Location: 'tosa, wisconsin
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Here's the one I used
http://www.smokemup.com/auto_math/dy...sion_ratio.php
Looks like the deck height is different between the 2 calculators?
http://www.smokemup.com/auto_math/dy...sion_ratio.php
Looks like the deck height is different between the 2 calculators?
#5
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
11.84 is wrong according to this calculator.
I got 11.4:1.
http://www.c5frc.com/calculators/Com...Calculator.htm
I got 11.4:1.
http://www.c5frc.com/calculators/Com...Calculator.htm
thanks for the help guys
mike
Last edited by quick346; 12-09-2007 at 01:08 PM.
#6
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
dcr calc
ok this is what i am useing but changing the bore to a ls1
http://www.alantripp.com/VE%20calcul...okup%20LS2.xls
came up with 11.79 scr and a 8.69 dcr with the 115 238/242 .605/.610 original spec hpe s cam
http://www.alantripp.com/VE%20calcul...okup%20LS2.xls
came up with 11.79 scr and a 8.69 dcr with the 115 238/242 .605/.610 original spec hpe s cam
Last edited by quick346; 12-09-2007 at 01:00 PM.