z28berryhill

iTrader: (26)

if not what do you have to do ?
kinda dumb question but...

JRracing

iTrader: (35)

No it can be done in the car. Search for the info.

bowe1632

iTrader: (1)

www.ls1howto.com
the link to a cam swap in an F-body is on the right hand column
just take the radiator out and u'll have plenty of room..you can leave the AC condenser in

THE CHOP SHOP

iTrader: (7)

One tip from my swap using LS1 how to is to jack the car up on the pass side. Unbolt the 4 bolts in the ac compressor and move it forward to take the pressure off the lines. Then move the condensor toward the motor a little and let the condesor lay on the ground. This worked really well for me.

NHRAFORMULA00

iTrader: (2)

If you take the oil pump off of the pickup tube for any reason,REPLACE the o-ring with a new one.Not sure if you are changing it or not( OIL PUMP ) but the o-ring has too be changed or you will have lifter noise.

ABQ99TA

iTrader: (17)

You should do the oil pump if your there. LS1howto is the way to go.