Ed Kurtis over there @Flowtech is a very smart guy, so you can't go wrong. I know already from experience with that cam, it ROCKS! 
Cam spec opinions...
Thread Starter
Teching In
Joined: Sep 2007
Posts: 44
Likes: 0
Cam spec opinions... A guy on another board i belong to is selling a flowtech custom grind cam that he never installed in his motor. The specs on it are 232/236 .600 .600 112+3 .... right now he is selling it for 300 shipped which is a bitchin deal if you ask me... however, the cam was designed for a forged 402 he was putting in a trailblazer. I am wondering how it will run in my LS1... it seems to be a pretty medium sized cam and i figure it should do ok for me...
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
A guy on another board i belong to is selling a flowtech custom grind cam that he never installed in his motor. The specs on it are 232/236 .600 .600 112+3 .... right now he is selling it for 300 shipped which is a bitchin deal if you ask me... however, the cam was designed for a forged 402 he was putting in a trailblazer. I am wondering how it will run in my LS1... it seems to be a pretty medium sized cam and i figure it should do ok for me...
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
Thread Starter
Teching In
Joined: Sep 2007
Posts: 44
Likes: 0
Buy it man. This is one of the best profiles IMO you can use in stock/modded LS1 motor! You can't go wrong with it. This cam matched with the heads you want to get, 10.90's is obtainable, I know from experience and use a camshafts similar to that alot, it will be a proven winner for you.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
