Generation III Internal Engine 1997-2006 LS1 | LS6

Sponsored by:

Heads/cam ?

Reply Subscribe

Search this Thread

Old

Feb 18, 2008 | 11:05 PM

#1

Thread Starter

TECH Resident

iTrader: (2)

Joined: Sep 2006

Posts: 760

Likes: 3

Default

Heads/cam ?

Will the stock production ZO6 heads and cam bolt up to a 98' F-body LS1? If so, any idea as to the mods that are required or is it a true bolt-on swap?

Old

Feb 18, 2008 | 11:10 PM

#2

10 Second Club

iTrader: (17)

Joined: Apr 2004

Posts: 2,409

Likes: 0

From: Alloway,NJ

Default

its a true bolt on swap.....get the obvious tho...new gaskets and new head bolts

-brandon

Old

Feb 18, 2008 | 11:24 PM

#3

TECH Enthusiast

iTrader: (30)

Joined: Jul 2007

Posts: 546

Likes: 1

From: Sacramento, CA

Default

it bolts right up and they port well too. Get studs not bolts though

Old

Feb 19, 2008 | 05:32 AM

#4

ЯєŧąяĐ Єl¡m¡иąŧøя ™

iTrader: (18)

Joined: Nov 2004

Posts: 16,083

Likes: 4

From: Justin, TX

Default

You really don't need studs unless you are racing constantly or changing heads frequently. Bolts work just fine. Just remember that they are TTY so make sure they are new and don't re-use your old hardware.

It is actually not considered a bolt-on, so I am sending this to the Internal Section.

Old

Feb 19, 2008 | 08:38 AM

#5

TECH Junkie

iTrader: (5)

Joined: Feb 2007

Posts: 3,183

Likes: 3

From: Key West, Florida

Default

for the time and money (bolts, gaskets)....put a bigger cam in.

Old

Feb 19, 2008 | 08:56 AM

#6

TECH Junkie

iTrader: (50)

Joined: Jan 2005

Posts: 3,241

Likes: 6

From: Texas

Default

need center bolt valve cover and coil pack brackets too

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 06:42 AM.