Is my lifter toast?
07-20-2003, 10:16 PM
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: The Thin Air
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Is my lifter toast? i have the valve covers off the car now... I did a cam swap... 
TSP 231/237 and I noticed when I was putting my T&D Rocker arms back on... only one lifter of the 16 was way off... one arm on number 8 had 1/4in of play, with the rockers tightened down... and the pushrod is about 1/4 in further down than the other one on number 8 at TDC...
im screwed huh?
TSP 231/237 and I noticed when I was putting my T&D Rocker arms back on... only one lifter of the 16 was way off... one arm on number 8 had 1/4in of play, with the rockers tightened down... and the pushrod is about 1/4 in further down than the other one on number 8 at TDC...im screwed huh?
07-21-2003, 01:16 AM
#2
Staging Lane
Join Date: Sep 2002
Location: Germany
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is my lifter toast? I had what sounds like the same problem and the roller had gauled sounded like crap. Hopefully you did not hurt the cam. you coulda collapsed one and it would sound like what you discribe check your springs first though.