Port matching....LS6 intake to 5.3/ LS1 or 6 heads...
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mine were off about 1.5mm at the bottom and along the sides of the port(SDPC CNC LPE LS6 heads -milled .0550").Used a dremel and even them up .Flared them about 1" into the intake.FWIW.
joel(Bink)
joel(Bink)
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)