Just sent cam spec sheet to PatrickG...
Teching In
Joined: Mar 2007
Posts: 41
Likes: 0
From: West Australia
I have sent mine off to im aswell, very keen to see what comes back for my 383.
Thread Starter
Joined: Dec 2007
Posts: 1,885
Likes: 1
From: Southern California
Just got the reply from PatrickG. Says the cam he has spec'd will give me good drivabilty and make great power under the curve...I dont really want to give out the specs just yet it is close to the duration that I thought he would advise with a nice lift to it. He also gave me the reccomended gasket thickness and pushrod length. Let the ordering begin! Will post as soon as parts are installed!
Regardless of the cam size, even on a bone stock motor, a fast 90/90 will help. I have a friend with a 2000(?) SS that is pretty much bone stock except for an air lid, a cutout and a tune. He was running 13.30ish in the 1/4 mile, added a fast 90/90 and ran a 12.50's after getting retuned. Looks like a solid gain to me.
