Ls Engine Non Computer?
Thread Starter
Staging Lane
Joined: Mar 2008
Posts: 67
Likes: 0
From: NOR CAL
Ls Engine Non Computer? Is there any way to make a LS series engine work without all the computer stuff? Ive seen a distributor adapter to allow the engine to work with a Ford type distributor. Can the engine be made to operate without all the computer stuff? Thanks, Scott!
Last edited by SCOTTYSALESMAN; Mar 21, 2008 at 07:23 PM.
Yeah you can get a carb and that distributor adapter. but honestly I would just go with the carb and MSD has a control box that controls the timing. They have different types that you can either tune on a laptop, or just adjust the advance/retard and the curve with a couple simple ***** on the box. very easy and keeps that ugly distributor adapter away. I believe it comes with the harness and everything, the only sensors needed I believe is the cam position, crank position, TPS, and MAP? Not positive about sensors but it's really the best way to go.
Thread Starter
Staging Lane
Joined: Mar 2008
Posts: 67
Likes: 0
From: NOR CAL
i WANT TO KEEP THE FUEL INJECTION ASPECT OF IT . iTS GOING INTO A 59 VETTE. i DONT WANT TO CUT THE HOOD AND THE FI STUFF FITS FINE. i JUST CANT SEE PUTTING ALL THAt computer stuff in an old vette. I can diagnose mechanical stuff but if the computer screws up then I'm off for diagnostics! Sorry for the caps lock. thanks, Scott!
You might want to switch over to a standalone FI system like haltech, microtech megasquirt or something like that, lap top tune-able and a whole lot less stuff than using a factory set-up.
Trending Topics
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Hi Scott,
There is a massfloefi complete FI with everything.
But I do not see why you are scared of running a base harness (which you have to do anyways), try Painless (sponsor), they remove a lot of the junk away and you are left with detailed simple install, heck if I can do it, any one can.
Otherwise there is the carb setup with MSD LS1/LS6 box
There is a massfloefi complete FI with everything.
But I do not see why you are scared of running a base harness (which you have to do anyways), try Painless (sponsor), they remove a lot of the junk away and you are left with detailed simple install, heck if I can do it, any one can.
Otherwise there is the carb setup with MSD LS1/LS6 box
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
Staging Lane
Joined: Mar 2008
Posts: 67
Likes: 0
From: NOR CAL
Concerned is a better description than scared. I just dont get computers. I'm old school, If I can see the problem I can fix it. I'm not concerned about the harness, do'nt I need a cpu? Do I have a diagnostic port to download upgrades , etc? That what SCARES me! Thaks, Scott!
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Yes, but if you want FI, you just gonna have to get used to it. You need a PCM, preferably 00>02, but for tuning you can just take it to a tuner and he takes care of that.
Or running MSD box, it is the same thing, upgrades are via CPU. It does come with preset pill curves, works best with their 232/234 cam (Comp Cam)
As I also mentionned there is a unit called Mass Flo EFI, kinda expensive but it pretty much tunes itself. They do have them for LS1/LS6 motors, still have to install a harness though.
Or running MSD box, it is the same thing, upgrades are via CPU. It does come with preset pill curves, works best with their 232/234 cam (Comp Cam)
As I also mentionned there is a unit called Mass Flo EFI, kinda expensive but it pretty much tunes itself. They do have them for LS1/LS6 motors, still have to install a harness though.
