PTV question

Reply Subscribe

Thread Tools

Search this Thread

Apr 5, 2008 | 07:25 AM

dennyd

Thread Starter

Teching In

iTrader: (2)

Joined: Jun 2006

Posts: 24

Likes: 0

From: Virgina beach va

PTV question

Ok I have a 230/236 .612/.607 111LSA+1 XFI/XFI lobes with 7.425 push rods stage 1 PRC cnc ls6 heads #799 cometic .040 gaskets stock bottom end with k-tech rod bolts. Will I have any piston to valve problems or will it be ok?

Apr 5, 2008 | 09:05 AM

brad8266

TECH Senior Member

iTrader: (23)

Joined: Aug 2005

Posts: 8,797

Likes: 0

From: Watertown, NY

You might be kinda close, measure to be sure.

Apr 5, 2008 | 09:10 AM

SOMbitch

TECH Senior Member

iTrader: (8)

Joined: Sep 2007

Posts: 6,881

Likes: 3

I am pretty sure you are OK on PTV but you knew the answer before you posted. When in doubt....... MEASURE!!! If you need pointers search it on here. Claying doesn't take much time and it's cheap.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last