Im wondering where to set my crank sprocket on my adjustable rollmaster chain setup. Building the motor right now it has -2 forged diamond pistons eagle rods stock crank and the block is bored to 3.905. Cam is a Ms4 which is supposed to have a 4deg advance ground in but has not been degreed yet. Valve train is 1.7 hardland rockers, ls7 lifters, chromoly pushrods. I plan on spraying between 100-150 shot in the future. Not sure if i should set the crank to 0 or maybe back 1. Thanks

 

FYI, the MS4 is ground by default with +1º of advance in it. So unless you requested otherwise when you ordered, yours should be +1 as well

 

Ok I did check and the cam is +1. So with that said what should I set the crank to? Thanks for the help.

 

Ttt!!