i got a slp line lock for free with two brake hoses and 3 wires and 2 are cut. i am willing to buy an instructor manual from someone so i can peice this together.

 

It's not that hard. 1 of the three wires is the ground for the toggle switch. The other two are a hot and an activate wire that run from the switch to the solenoid. Just get some wire if needed and some flat connectors. I don't rightly remember if mine had an inline fuse or not, but wouldn't hurt to have one just in case.

 

Here is SLP instruction directions.

http://www.slponline.com/inst/25000.pdf

Bill

 

blue98z yea i looked at it and you need the fuse

bill thanks alot