Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Fuel Issue

Thread Tools
 
Search this Thread
 
Old May 5, 2008 | 12:40 PM
  #1  
qakhntr26's Avatar
Thread Starter
Teching In
 
Joined: Aug 2007
Posts: 3
Likes: 0
From: Northern California
Default Fuel Issue

Ok I am need of some help. I have a 2002 WS6 that I have installed. I start it up and everything is good. I can run RPMs up no problem. I can drive with no issue except when i come to a stop it will idle down and shut down (this also happens after warm up at an idle. I am running a aeromtive pump AEI-11109 325GPH 45 PSI with a Race Pump Regulator, Fast Rails with stock injectors. Any Ideas?
Reply
Old May 6, 2008 | 10:24 AM
  #2  
Bill Bowling's Avatar
TECH Addict
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (6)
 
Joined: Apr 2003
Posts: 2,597
Likes: 4
From: Lawrenceville, GA
Default

What is your fuel pressure at the rails? It should be around 58 psi.

Good luck.
Bill
Reply
Old May 6, 2008 | 12:37 PM
  #3  
qakhntr26's Avatar
Thread Starter
Teching In
 
Joined: Aug 2007
Posts: 3
Likes: 0
From: Northern California
Default Fuel Issue

Do not know that right now but I am installing a gauge later.
Reply




All times are GMT -5. The time now is 07:14 PM.