Generation III Internal Engine 1997-2006 LS1 | LS6

Sponsored by:

Fuel Issue

Reply Subscribe

Search this Thread

Old

May 5, 2008 | 12:40 PM

#1

Thread Starter

Teching In

Joined: Aug 2007

Posts: 3

Likes: 0

From: Northern California

Default

Fuel Issue

Ok I am need of some help. I have a 2002 WS6 that I have installed. I start it up and everything is good. I can run RPMs up no problem. I can drive with no issue except when i come to a stop it will idle down and shut down (this also happens after warm up at an idle. I am running a aeromtive pump AEI-11109 325GPH 45 PSI with a Race Pump Regulator, Fast Rails with stock injectors. Any Ideas?

Old

May 6, 2008 | 10:24 AM

#2

TECH Addict

iTrader: (6)

Joined: Apr 2003

Posts: 2,597

Likes: 4

From: Lawrenceville, GA

Default

What is your fuel pressure at the rails? It should be around 58 psi.

Good luck.
Bill

Chug! Chug! Chug!

Chug! Chug! Chug!

Old

May 6, 2008 | 12:37 PM

#3

Thread Starter

Teching In

Joined: Aug 2007

Posts: 3

Likes: 0

From: Northern California

Default

Fuel Issue

Do not know that right now but I am installing a gauge later.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Show Printable Version

Email this Page

Email this Page

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 08:25 AM.