Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

cam help

Thread Tools
 
Search this Thread
 
Old May 24, 2008 | 12:56 PM
  #1  
twitchtwice's Avatar
Thread Starter
12 Second Club
iTrader: (12)
 
Joined: May 2008
Posts: 2,612
Likes: 1
Default cam help

im going to be purchasing headers, ls6 intake, and a cam in that order.

what is a good cam to buy. i hear Trex are really good cams?

what do you guys think?
Reply
Old May 24, 2008 | 01:19 PM
  #2  
socmguy's Avatar
Restricted User
iTrader: (18)
 
Joined: Apr 2007
Posts: 1,514
Likes: 0
From: Fayetteville, NC
Default

the cam guide at the top has all the info you need. The T Rex is a really big cam, make sure its what you want.
Reply
Old May 24, 2008 | 06:20 PM
  #3  
Michael V's Avatar
Staging Lane
 
Joined: Apr 2008
Posts: 73
Likes: 0
From: Lake Havasu
Default

Originally Posted by twitchtwice
im going to be purchasing headers, ls6 intake, and a cam in that order.

what is a good cam to buy. i hear Trex are really good cams?

what do you guys think?
Order doesn't matter. If you don't tune each one, you don't have a baseline as to how good the next mod is, and tuning is needed for each of these mods to get the most out of them. Best bet is go to one of the support vendors listed on the right side here that is in your area. Work with him on your future goals as far as what you want to do with your car. There is a big differance between a road race engine, a street race engine, and a mostly drag race engine. Your vendor can customize your combination to your requirements so that you are "Hard" about the final product.

Good Luck.

Mike V
Reply




All times are GMT -5. The time now is 03:46 PM.