Anyone have a cam fron Dragon race engineering?
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: VA
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have a cam fron Dragon race engineering?
I was going through the current GM high peformance mag. and seen them listed in the back with a new cam design for the lsx motor. Any one got one of there cams? What do you have if you do? Any numbers?
#2
Launching!
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: VA
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Well I apologize about my negligence in posting this but it looks like our new DX lineup of Camshafts is truly king of the hill. The tuned airflow of the DX1 is so efficient that we're recommending this camshaft for all LSx vehicles under 410 CID. There is also a blower/turbo option with a 114 LSA. The cam specs and lobes are proprietary to Dragon but the basics are as follows
DX1 - 227/236 113 Mid .644/.611 with 1.7
DX1B - Same with 114 LSA
DX7 - Large Cube Motors and LS7's with 1.8 Ratio Rockers (The cam alone adds over 60 RWHP on a bone stock LS7)
234/240 113 .640/.645
We can also custom grind a variation for you for the 400CID crowd. However the DX1 is so efficient across the band we still recommend it up to 418 CID.
Found this at there forum site.
DX1 - 227/236 113 Mid .644/.611 with 1.7
DX1B - Same with 114 LSA
DX7 - Large Cube Motors and LS7's with 1.8 Ratio Rockers (The cam alone adds over 60 RWHP on a bone stock LS7)
234/240 113 .640/.645
We can also custom grind a variation for you for the 400CID crowd. However the DX1 is so efficient across the band we still recommend it up to 418 CID.
Found this at there forum site.