Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Urgent! Need some help problem after rocker install

Thread Tools
 
Search this Thread
 
Old Jun 17, 2008 | 06:30 PM
  #1  
Cmhatter9SS's Avatar
Thread Starter
Teching In
 
Joined: Jan 2008
Posts: 39
Likes: 0
From: Eastern PA
Default Urgent! Need some help problem after rocker install

Ok. I just change 3rd stock rocker on front of motor pass side. Bolted everything back up. Made sure 22ft#'s on the rocker and also turned the engine with a ratch to make sure pushrod was at its lowest point. Bolted everything back up. Went to start the car and it poped real loud so I tured it off anyone have any ideas? Spark problem? coil back on wrong firing order? Need some help asap thanks
Reply
Old Jun 17, 2008 | 06:54 PM
  #2  
LS1C5Vette's Avatar
TECH Resident
iTrader: (11)
 
Joined: Jan 2007
Posts: 836
Likes: 0
From: Oklahoma City
Default

What kind of pop? Backfire or some kind of engine noise "pop"?
Reply
Old Jun 17, 2008 | 07:06 PM
  #3  
Mssingkid's Avatar
TECH Enthusiast
iTrader: (7)
 
Joined: Apr 2004
Posts: 546
Likes: 0
From: Carmel, NY / ATL, GA
Default

Make sure the coil packs are all connected, wires are in good condition and are secure to the plugs...
Reply
Old Jun 17, 2008 | 07:28 PM
  #4  
sappy96's Avatar
On The Tree
iTrader: (1)
 
Joined: Feb 2008
Posts: 116
Likes: 0
From: Hampton VA
Default

fuse pop?
Reply
Old Jun 17, 2008 | 07:51 PM
  #5  
Cmhatter9SS's Avatar
Thread Starter
Teching In
 
Joined: Jan 2008
Posts: 39
Likes: 0
From: Eastern PA
Default

everything is a go thanks guys f*cked up to coil packs
Reply




All times are GMT -5. The time now is 04:56 PM.