HPE Megadeath
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Mar 2007
Posts: 1,591
Likes: 0
From: Middle east , Kuwait
HPE Megadeath hi , anyone tried this cam 244/242 .612/.610 112LSA ? how about this cam i heared from people they said it's stronger than G5X3 and MS3 , Dyno numbers or anything
thanks , Moammed.
thanks , Moammed.
Last edited by PONTIAC SLP; Jun 18, 2008 at 06:32 AM.
I like the name of it..LOL , did you try searching the dyno section?
here's one
https://ls1tech.com/forums/showthrea...hlight=244/242
here's one
https://ls1tech.com/forums/showthrea...hlight=244/242
I have the HPE Mega Death 244/242 .612/.610 112lsa
I may not recommend Chuck for Tuning anymore but this cam sure is nice
I am putting down 480rwhp and 460tq NA
The cam was designed to get the most out of stock casting heads, with a good tune it drives very well with a nice rumble at lights
I may not recommend Chuck for Tuning anymore but this cam sure is nice
I am putting down 480rwhp and 460tq NA
The cam was designed to get the most out of stock casting heads, with a good tune it drives very well with a nice rumble at lights
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I'll stick with my MS3.... The Megadeath cam requires lots of Gear in the rear to utilize its power.
I have a buddy with a C6 A4 3.15 gearing, with his old MTI X1 cam/ported LS6 heads he made 430rwhp and ran mid 11s. He switched to the Megadeath cam and Trickflow heads and FAST 90 and laid down 460rwhp, but his 1/4 mile times were in the high 12s. The car is a slug/mosh pit under 4k.
To get this car to come out the hole and move, he needs at least some 4.10s.
I have a buddy with a C6 A4 3.15 gearing, with his old MTI X1 cam/ported LS6 heads he made 430rwhp and ran mid 11s. He switched to the Megadeath cam and Trickflow heads and FAST 90 and laid down 460rwhp, but his 1/4 mile times were in the high 12s. The car is a slug/mosh pit under 4k.
To get this car to come out the hole and move, he needs at least some 4.10s.
good point ^^ no one metioned that but one would think if your looking at a cam that big you already know you need gears, but gears will help any cam. Just some are mandatory unless you like giving up the first 100 feet or so
