Another pushrod thread..
Thread Starter
On The Tree
Joined: Jul 2007
Posts: 100
Likes: 0
From: Houston, TX
Another pushrod thread.. I'm a little unclear on what pushrods to get. I need hardened pushrods. .224/.228 on a 115 lsa is going in the bird. Can someone clarify how this works and what I might need.
Thanks again fellas.
Thanks again fellas.
Agreed.
Does this motor have OEM lifters? Stock heads (untouched)?
More than likely, you are looking at 7.400" or 7.425" depending on the base circle of the new cam.
Although as mentioned, safest way (and the way to maximize the cam) is to measure. Maybe you need a 7.413" or something.
Does this motor have OEM lifters? Stock heads (untouched)?
More than likely, you are looking at 7.400" or 7.425" depending on the base circle of the new cam.
Although as mentioned, safest way (and the way to maximize the cam) is to measure. Maybe you need a 7.413" or something.
