LSx small journal rods?
6600 rpm clutch dump of death Administrator
Joined: Dec 2001
Posts: 4,983
Likes: 13
From: Texas
I'll cite my own example. We used a Probe I Beam SBC rod which was about the lightest SBC rod I could find that was reasonably priced. We just trimmed it and it worked like a champ.
I think the weight on them was 530grams.
C2C journal pin b/e weight pn
6.125 2.100 .927 .943 531 10667
When we did the bob weight on them they were 413 on the Big End and 167 on the small end.
But, Probe also has some Honda stuff, but I think it is Honda specific. I don't know if they can do a Honda Jornal in the I beams I never asked.
The NASCAR stuff is usually reasonable, and way overkill in many apps.
I think the weight on them was 530grams.
C2C journal pin b/e weight pn
6.125 2.100 .927 .943 531 10667
When we did the bob weight on them they were 413 on the Big End and 167 on the small end.
But, Probe also has some Honda stuff, but I think it is Honda specific. I don't know if they can do a Honda Jornal in the I beams I never asked.
The NASCAR stuff is usually reasonable, and way overkill in many apps.
Thread Starter
Teching In
Joined: Feb 2008
Posts: 15
Likes: 0
From: Portsmouth, England (but an Aussie)
Cheers for the info J-Rod, I think I'm cool with where I'm going now.
Yeah those old Nascar Lentz rods look inviting!
I know how that one feels Kurt
Thanks for your help gentlemen, really appreciated.
Steve
Yeah those old Nascar Lentz rods look inviting!
I know how that one feels Kurt
Thanks for your help gentlemen, really appreciated.
Steve
