Cam specs for a 370?
Thread Starter
11 Second Club
iTrader: (11)
Joined: Aug 2005
Posts: 574
Likes: 0
From: St. Petersburg, FL
Cam specs for a 370? Could I please have some opinions on this cam for my 370 build. 228/232 xer lobes 111 +4. The car is a daily driver and will see 500 miles a week. Motor has forged pistons with -2 cc reliefs, tsp ls6 2.5 hds worked on by wre for the larger bore and running a ls6 intake & ported throttle body. It is going to produce around 11-1 cr and 8.7-1 scr. I think it should be a nice cam for a daily driver.
i had a 230/228 cartek back in the day that i loved in the 346 . being you got reliefs you could go bigger and not have to worry about piston to valve as much . the cam you mentioned though would be an excellent daily driver on a built cube .
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Could I please have some opinions on this cam for my 370 build. 228/232 xer lobes 111 +4. The car is a daily driver and will see 500 miles a week. Motor has forged pistons with -2 cc reliefs, tsp ls6 2.5 hds worked on by wre for the larger bore and running a ls6 intake & ported throttle body. It is going to produce around 11-1 cr and 8.7-1 scr. I think it should be a nice cam for a daily driver.
Thread Starter
11 Second Club
iTrader: (11)
Joined: Aug 2005
Posts: 574
Likes: 0
From: St. Petersburg, FL
I already have the 111 +4 cam will the 113 +3 make that much of a difference? I saw the 113 drops the dcr some. Thanks again Pred-z
Last edited by Pharcyde50; Jun 12, 2009 at 07:36 PM.
