All Pro Cylinder Heads
Thread Starter
TECH Apprentice
iTrader: (30)
Joined: Apr 2007
Posts: 321
Likes: 0
From: milton florida
All Pro Cylinder Heads has anyone used the all pro heads? im butting togeather a new motor and trying to get a set of heads that will flow for a good price..thanks guys
I have a set, but I am selling them to a friend of mine. He'll be using them on his 408 build. They are a very nice head. The pushrod holes are 1/2 inch and I can stick my finger all the way through it. A lot of guys run those heads. Mighty Mouse, PSJ, the Ohio boys, etc... If you check on ebay you can buy a set of bare castings for $700 with guides. You'll need to have the guides installed, the seats cut, and a valve job. For the price though you can have a set of really nice aftermarket heads for around $1700.
I carry them, which set are you looking for the LS2 or LS7 ?
I have a set of the LS2's in stock right now, full race prep with new titanium intake valves and slightly used inconel exhaust valves. $2700 to your door.
I also have some of the LS7 LSW heads but your looking at $4700 for them. BUT your talking about a head that flows 409 on the intake and 260 on the exhaust and is built to handle it and the rpms. Let me know what you need and I'll try to help.
I have a set of the LS2's in stock right now, full race prep with new titanium intake valves and slightly used inconel exhaust valves. $2700 to your door.
I also have some of the LS7 LSW heads but your looking at $4700 for them. BUT your talking about a head that flows 409 on the intake and 260 on the exhaust and is built to handle it and the rpms. Let me know what you need and I'll try to help.
