Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Static/Dynamic Compression good for pump gas?

Old Aug 24, 2008 | 09:31 PM
  #1  
redchevytruck's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: May 2008
Posts: 68
Likes: 0
From: kansas
Default Static/Dynamic Compression good for pump gas?

i have a 04 chevy truck with a 408ci motor that i have apart right now ..
alot of miss match parts and trying to get eveything lined out ..
AFR 225/65
11/1 FLAT TOP JE 243017
.040 HEAD GASKET

just has patrick g spec me a cam... it shows ·
238/244 .615”/.612” 112LSA +2 advance (actual measured dimensions)
Static/Dynamic Compression with new cam: 11.84:1, 8.76:1

IS THAT TO HIGH FOR PUMP GAS ? ? ?
Reply
Old Aug 24, 2008 | 10:09 PM
  #2  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default

That's just fine on premium unleaded. Just make sure your tune is right in all the correct places. Look forward to seeing some hellacious torque numbers!
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Aug 25, 2008 | 06:47 PM
  #3  
redchevytruck's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: May 2008
Posts: 68
Likes: 0
From: kansas
Default sweet

sweet good to here pump gas will work on this bad boy....
if you where a gussing guy what % of hp/tq gane will i get with this new cam ?

Originally Posted by Patrick G
That's just fine on premium unleaded. Just make sure your tune is right in all the correct places. Look forward to seeing some hellacious torque numbers!
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:29 AM.