calling pat g
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 386
Likes: 0
From: Atlantic city nj
calling pat g Pat , i ordered a cam that you did the specs on, however when i read the cam card the specs didnt match.I think they sent me the wrong cam, or am i just reading it wrong. Im not sure if you keep the orders in your records, but my name is wilfredo ramos. If you can could you please email me my spec sheet from your records. The cam specs you gave me were 233/234/604/ 113+2 lsa. the cam card says
" these specs are for cam installed @111.0 Intake from centerline"
intake Exhaust
Duration@ .050 230 230
Lobe lift .3610 .3560
lobe separation 113.0
" these specs are for cam installed @111.0 Intake from centerline"
intake Exhaust
Duration@ .050 230 230
Lobe lift .3610 .3560
lobe separation 113.0
Last edited by wilwhite2kss; Sep 22, 2008 at 02:57 PM.
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Jan 2006
Posts: 386
Likes: 0
From: Atlantic city nj
hopefully he can get back soon, im on the phone with comp right now. i had to wait a month to get this, i was very patient beacause of what thunder racing was going through. Now this.This seems far off to me, atleast the lsa is correct
