Pat , i ordered a cam that you did the specs on, however when i read the cam card the specs didnt match.I think they sent me the wrong cam, or am i just reading it wrong. Im not sure if you keep the orders in your records, but my name is wilfredo ramos. If you can could you please email me my spec sheet from your records. The cam specs you gave me were 233/234/604/ 113+2 lsa. the cam card says

" these specs are for cam installed @111.0 Intake from centerline"

intake Exhaust
Duration@ .050 230 230

Lobe lift .3610 .3560

lobe separation 113.0

 

Cams aren't usually dead on. That on seems more off than others I've seen but it is close. And yes Pat G keeps the records he should be able to straighten you right out.

 

hopefully he can get back soon, im on the phone with comp right now. i had to wait a month to get this, i was very patient beacause of what thunder racing was going through. Now this.This seems far off to me, atleast the lsa is correct

 

My 230/232 came as a 232/236. Don't know why yours are on the low side, but I suppose that happens.

 

My 224/228 .633/.639 110LSA ended up being like a 224.3/228.9 .640/.646 110.1LSA...I thought that was pretty close.