Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

New Setup Advice

Thread Tools
 
Search this Thread
 
Old Oct 7, 2008 | 04:03 AM
  #1  
KevinWS6's Avatar
Thread Starter
Teching In
iTrader: (4)
 
Joined: Aug 2005
Posts: 38
Likes: 0
From: Lafayette, LA
Default New Setup Advice

Hey guys this football betting season has been kind to me(so far) so its time to do some upgrades to the WS6(02). It is not my daily driver and it may see the track once or twice so this will be strictly a street setup. I do live in Houston so when I do get it out I am usually in some kind of traffic so I need it to have decent drivability. I have been looking around for quite awhile reading about different setups and I think I am going to go with the PRC Stage 2.5 LS6 heads and the Torquer V3 cam(112 or 113lsa). As of right now I just have pacesetters, tsp y, magnaflow catback, and lid. Just the usual stuff. Does this sound like a good setup? I will be getting a tune after it is all on the car. I will also be putting a Yank SS3600 in at the same time. Who in Houston, or nearby, would best be able to tune this setup? I would appreciate and am open to any suggestions or comments about the setup or a shop. Thanks.

Kevin

Last edited by KevinWS6; Oct 7, 2008 at 06:31 PM.
Reply
Old Oct 7, 2008 | 06:32 PM
  #2  
KevinWS6's Avatar
Thread Starter
Teching In
iTrader: (4)
 
Joined: Aug 2005
Posts: 38
Likes: 0
From: Lafayette, LA
Default

bump/
Reply
Old Oct 7, 2008 | 07:31 PM
  #3  
conan's Avatar
TECH Senior Member
20 Year Member
iTrader: (5)
 
Joined: May 2004
Posts: 6,492
Likes: 6
From: Back in the Burg
Default

If your driving in alot of trafic You may want to give up some hp and go with something like the torquer V2 on a 114lsa. Texas speed will help you too on a converter choice to match their cam.
Reply




All times are GMT -5. The time now is 06:08 PM.