LS2/LS3 Throttle Body to LS1 adapter?
#1
LS2/LS3 Throttle Body to LS1 adapter?
I've noticed a few vendors selling LS2->LS1 TPS adapter harnesses.
I need one for a car in Australia (ls1 car being fitted with an ls3).
- i am not sure if the US adapters will work with Holden cars.
Before i buy one (adapter) could someone tell me if the USA LS2/LS3 throttle bodies are branded Hitachi?
thanks!
I need one for a car in Australia (ls1 car being fitted with an ls3).
- i am not sure if the US adapters will work with Holden cars.
Before i buy one (adapter) could someone tell me if the USA LS2/LS3 throttle bodies are branded Hitachi?
thanks!
#2
ls3 throttle on an ls1
hi there
if u want to run an ls3 throttlebody on an ls1 fly by wire ecu and harness
u need a module
u just cant run a wire adapter
the voltages are different between the ls3 and the ls1 fly by wires throttles
these are needed if u have
a vz fly by wire ls1
and u plan to run the ls3 fly by wire throttlebody
i have one in stock if u want it
thanks
if u want to run an ls3 throttlebody on an ls1 fly by wire ecu and harness
u need a module
u just cant run a wire adapter
the voltages are different between the ls3 and the ls1 fly by wires throttles
these are needed if u have
a vz fly by wire ls1
and u plan to run the ls3 fly by wire throttlebody
i have one in stock if u want it
thanks
#3
2005 Cadillac Escalade Lq9 DBW throttle body harness to LS3 102mm throttle body
How many choices/options are there, how much does this module cost?
QUOTE=Doubledip;10945808]hi there
if u want to run an ls3 throttlebody on an ls1 fly by wire ecu and harness
u need a module
u just cant run a wire adapter
the voltages are different between the ls3 and the ls1 fly by wires throttles
these are needed if u have
a vz fly by wire ls1
and u plan to run the ls3 fly by wire throttlebody
i have one in stock if u want it
thanks[/QUOTE]
QUOTE=Doubledip;10945808]hi there
if u want to run an ls3 throttlebody on an ls1 fly by wire ecu and harness
u need a module
u just cant run a wire adapter
the voltages are different between the ls3 and the ls1 fly by wires throttles
these are needed if u have
a vz fly by wire ls1
and u plan to run the ls3 fly by wire throttlebody
i have one in stock if u want it
thanks[/QUOTE]