Clear lid comparision PICS: MTI vs FTP 100mm
#1
Clear lid comparision PICS: MTI vs FTP 100mm
Its pretty hard to take measurements, but I have the biggest point at 105mm. That is just the half inch where the 100mm MAF fits though. Best as I can read it, it looks really really damn close to 100mm through and through. Put it this way, I have bigger hands than most people and I can make my fist fit. I think that says a lot right there.
Overall, I think that bulge gives it the extra millimeters. That and they flared out the end just a bit more so a 100mm maf would fit in the end. I think the mouth on the inside is a little wider aswell. Another VERY important note is the MTI clear lids crack because it is a ridgid plastic. These FTP lids are flexible like Rubbermaid containers.
Last edited by HotWhipT/A; 06-02-2009 at 08:13 PM.
#2
Teching In
iTrader: (8)
Join Date: Apr 2008
Location: ODESSA TEXAS
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Awesome comparison I currently have the MTI clear lid and yes the cracking has begun I have been looking to replace it and I came across the Fast Toys lid and kept thinking about it since, after your comparison there is no doubt in my mind where the replacement lid will be coming from.
#3
Registered User
Join Date: May 2009
Location: Columbus, OH
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
FTP=file transfer protocol? Not that these parts apply to me or anything, but they look insanely inexpensive to produce. Make sure you're not running an aftermarket maf on a stock tune...
#4
Your probably right on cost, but you gotta pay to play. They have something people want and can jack up the price. That damn MTI lid costs $129 and is crap. I'd rather pay the little bit more for a bigger, much better quality lid. I do agree that $180 for a lid is pretty expensive though.
#5
Registered User
Join Date: May 2009
Location: Columbus, OH
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Your probably right on cost, but you gotta pay to play. They have something people want and can jack up the price. That damn MTI lid costs $129 and is crap. I'd rather pay the little bit more for a bigger, much better quality lid. I do agree that $180 for a lid is pretty expensive though.
#6
TECH Resident
iTrader: (23)
Join Date: Oct 2008
Location: Rhode Island
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
so what is ideal for a lid this size an ls2 an up? i just bought a used mti clear lid a month ago.
btw i just looked at your cardomain page and im just speechless! best f body ive seen on here. how long do you figure from start to finish?
btw i just looked at your cardomain page and im just speechless! best f body ive seen on here. how long do you figure from start to finish?
#7
Thanks man! Start to finish on what? I've been at it for 3 years now. The car *should* be painted end of this summer. After that is easy stuff, but more very expensive stuff. Things like the wheels, rear end, nitrous, suspension...ect.
Trending Topics
#16
10 Second Club
iTrader: (16)
My ftp 104 rubbed my ws6 hood, and cracked in multiple places. I love the clear lids I just bought and put a new slp lid back on. I wish the clear lids could be like the slp.
OP nice comparison pics. Can't believe I haven't came across this thread before since it's an older thread.
OP nice comparison pics. Can't believe I haven't came across this thread before since it's an older thread.
#18
We are looking into producing another batch of clear lids so keep your eyes on the other thread in this forum. We will be posting a link to pre order shortly.