L92 engine harness
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Bothell
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Im switching to a cable throttle body and eliminating the vvt on my l92 and was curious if anyone could recommend a good harness/ ECM from another year/model vehicle.
#3
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Bothell
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
its going into a 1984 s-10. When I bought the motor it had a little collision between the #1 piston and the intake valve, so it needed valves, push rods... I just decided the VVT wasnt something I wanted to deal with. This will be my first turbo build and I wanted to eliminate any additional variables for right now. Since I dont know much about the VVT, I dont even know if everything for it is there, so im just going to a standard cam/ timing set up. A turbo 6.2 liter will do everything I need it to without the vvt. I have 2 of these motors and I intended to leave the VVT in place when I swap the second one.