bubba3689

I was was wondering what it would take to change a z28 over from a ls1 to a lq9. I totaled my silverado ss last week and am getting a 98 z28 with 180k miles> i bought the truck back for $1200 so i figures i would rebuild the motor to in the camaro when the stock motors craps out on me. would this be a good thing to do or not. I know ill have to change a couple parts so i was gonna see if yall could help e get a parts list going. Thanks in advance

J&J Speed Shop

iTrader: (8)

Depends on what year Silverado SS??

the_merv

iTrader: (88)

Engine is easy..direct bolt in and wire up..just drill & tap out the ear for the Alternator Bolt.

bubba3689

its an 03

5LTRETR97

iTrader: (2)

Thats all I had to do. Real simple!!

5LTRETR97

iTrader: (2)

Hey MERV, Did you custom make your true duals? I was thinking about doing the same thing. There are some kits on ebay for around $800 or $900 bucks. If you did custom make them, how much did it cost you in piping. Thanks.

the_merv

iTrader: (88)

Summit X-pipe..$100
Mufflers..$140
That amazing sound..priceless..

There are some things in this world that money can't buy, for everything else..that's mod money..



Here is what they look like..

5LTRETR97

iTrader: (2)

Sweet. What kind of mufflers? And does it hang down real low? Clearance issues? Sweet, thanks man.

5LTRETR97

iTrader: (2)

Also, do you have a part number for that x-pipe? There are a lot on summit.

the_merv

iTrader: (88)

3" X-pipe kit.. those Mufflers are Flo Pro Twisties.

LSWNDR

It's a whole different animal of the street with a 6.0L in it... nothing like a H/C car getting rubber for miles with only H/C.... lol For sure the best way to go. Look up www.texas-speed.com in the heads and cam section for sure you can't go from with a set of CNCed heads and a texas giant.

the_merv

iTrader: (88)

Here is the part Number on that X-pipe Kit..

http://www.summitracing.com/parts/SUM-642130/

Here are the Mufflers..look for the 12" lenght, 3" diameter one.

http://www.flopro.com/

5LTRETR97

iTrader: (2)

Thanks MERV!!

5LTRETR97

iTrader: (2)

I was thinking about going with SLP Bullet II's for the muffler's. But I will check out Flo Pro's. Thanks again man.