If you have a LPE 24X-58X conversion module come in
Thread Starter
10 Second Moderator
iTrader: (2)
Joined: Feb 2004
Posts: 559
Likes: 0
From: Mid Michigan
If you have a LPE 24X-58X conversion module come in I bought a LPE 24X to 58X converter off nastyc6 on the corvette forum and the plugs are all cut off it, he said it was "hardwired" into the car???
If you have one of these will you look at yours and tell me which wires go to which sensor? I think the 4 blacks are ground and red is voltage and the 4 sets are coming out of the box in groups of 3.
Red, black, grey cut about an inch and a half long
red, black, green cut about 10 inches long
red, black, white cut about an inch and a half long
red, black, yellow cut about 10 inches long
My cheapness has bitten me in the **** again!
Thankyou for helping me, Tom
If you have one of these will you look at yours and tell me which wires go to which sensor? I think the 4 blacks are ground and red is voltage and the 4 sets are coming out of the box in groups of 3.
Red, black, grey cut about an inch and a half long
red, black, green cut about 10 inches long
red, black, white cut about an inch and a half long
red, black, yellow cut about 10 inches long
My cheapness has bitten me in the **** again!
Thankyou for helping me, Tom
Get the manual here, it's got diagram in it:
http://www.lingenfelter.com/sites/li...ons%20v2.5.pdf
You're going to splice in some wire to get the indicated lengths. Make sure you do so and mount the box next to the PCM or inside the cabin. Make sure you follow directions re: installation location and plug wires. Ask me how I know...
http://www.lingenfelter.com/sites/li...ons%20v2.5.pdf
You're going to splice in some wire to get the indicated lengths. Make sure you do so and mount the box next to the PCM or inside the cabin. Make sure you follow directions re: installation location and plug wires. Ask me how I know...
Thread Starter
10 Second Moderator
iTrader: (2)
Joined: Feb 2004
Posts: 559
Likes: 0
From: Mid Michigan
I was in line for one at LPE but got greedy and dorked myself by giving $170 for this piece of crap...This is a very early version...prolly get back in line for one again on monday
Trending Topics
Dudes, the one has TRG-001 on it and the other has TRG-002. Are these different pieces?? That might be why they look different. Or are they just older and newer versions of the same thing??
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Couldn"t find my manual,sorry, but mine is the 2 version as well. I believe it is a newer version of the same unit. If all else fails call them and ask them about it. May be better off getting the 2nd version. I'm sure there are reasons they updated it.
