Ignition Harness Routing
Thread Starter
Teching In
Joined: Feb 2008
Posts: 8
Likes: 0
Ignition Harness Routing I am rerouting my ignition coil pack harness due a slight change in the mounting location of the coils, and I really did not like the appearance of the factory harness.
Is there any reason I should not route the harness under the plug wires as shown in the picture? Possible mis-fire issues due to interference from the coil firing is my main concern.
Appearance is one thing, performance is better..
Is there any reason I should not route the harness under the plug wires as shown in the picture? Possible mis-fire issues due to interference from the coil firing is my main concern.
Appearance is one thing, performance is better..
