holley hi ram
holley hi ram im sorry for asking so many dumb questions lately, but i finally got my ls2 short block !!! woop woop. well im plan im doing stock l92 heads, a custom grind nitrous cam. and some pistons..
but hows the holley hi ram intake ? i havent read much about them, and i searched but didnt really come up with alot. are they worth the money ? do they make respectable power ?
but hows the holley hi ram intake ? i havent read much about them, and i searched but didnt really come up with alot. are they worth the money ? do they make respectable power ?
I've heard great things about them on Big Cube and nitrous motors ad sold a few. I'm hoping to see someone try some back to back on a Holley vs an Edelbrock Pro-Flo
When ready if you need a killer deal on any manifolds let me know.
When ready if you need a killer deal on any manifolds let me know.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
There are not too many dyno test's out there on the intake, but Richard did one and it's a good read:
http://www.hotrod.com/techarticles/h...ass_ls_hi_ram/
slippi they plan to release one for cathedral port heads too.
I have no direct experience but I'm thinking that intake for a boost setup (turbo?) on top of a 6.0 liter might like rpms a lot. So I think you'd have to think about max rpm limit, and picking the right cam to keep your power in the range that you are seeking.
http://www.hotrod.com/techarticles/h...ass_ls_hi_ram/
slippi they plan to release one for cathedral port heads too.
I have no direct experience but I'm thinking that intake for a boost setup (turbo?) on top of a 6.0 liter might like rpms a lot. So I think you'd have to think about max rpm limit, and picking the right cam to keep your power in the range that you are seeking.
