Solid roller LS2 MS4 cam lash

Reply Subscribe

Thread Tools

Search this Thread

Oct 25, 2012 | 11:21 PM

silverz28camaro

Thread Starter

TECH Fanatic

iTrader: (20)

Joined: Sep 2008

Posts: 1,962

Likes: 9

From: st.louis

Solid roller LS2 MS4 cam lash

whats everyone setting the solid roller lash at? I got the intake at .014 and exhaust at .016...so far everything sounds good, just wondering whats the ideal clearance.

Oct 26, 2012 | 12:15 PM

Gordon0652

TECH Junkie

iTrader: (4)

Joined: Sep 2006

Posts: 3,188

Likes: 2

Is the core build for a solid set-up?

Oct 30, 2012 | 04:03 AM

bww3588

12 Second Club

iTrader: (49)

Joined: Sep 2005

Posts: 8,139

Likes: 10

From: Chillicothe/Lima, Ohio

That's what I was thinking. If it's not a solid roller grind, I can't see it working well.

Oct 30, 2012 | 04:29 AM

LS1MCSS

TECH Junkie

iTrader: (18)

Joined: Jan 2006

Posts: 3,831

Likes: 8

From: Dover, Arkansas

Quote:

Originally Posted by bww3588

That's what I was thinking. If it's not a solid roller grind, I can't see it working well.

The only specs I found for An MS4 has it listed as hydraulic. If his cam is solid, it must be something other than an MS4.

Oct 30, 2012 | 07:22 AM

bww3588

12 Second Club

iTrader: (49)

Joined: Sep 2005

Posts: 8,139

Likes: 10

From: Chillicothe/Lima, Ohio

Agreed...or something is not adding up

Oct 30, 2012 | 07:52 AM

Gordon0652

TECH Junkie

iTrader: (4)

Joined: Sep 2006

Posts: 3,188

Likes: 2

There should be numbers engraved on the Cam on the back side. Find out who is the grinder i.e. CompCams, CAM Motion and call them with the numbers.

Oct 30, 2012 | 08:09 AM

bww3588

12 Second Club

iTrader: (49)

Joined: Sep 2005

Posts: 8,139

Likes: 10

From: Chillicothe/Lima, Ohio

I'm guessing he is trying to run solid rollers with an actual ms4...I'm not 100% how it's going to work out, but there is a reason grinds are different for solid and hydraulic.

Reply Subscribe