Tach probloms
Tach probloms Hi guys I have a 1999 Camaro SS that I recently swapped full suspension into along with a 6.0 iron block with ls3 heads, Everything worked fine when first starting it up other then the tach. I checked wiring and grounds ect. did some research and the harness for ls1 car to ls2 cam sensor you have to swap a and c wires so I swapped them and it worked for about 30 seconds or so and stopped but when driving it will randomly start working for a few seconds and just drop out of no where. Ive replaced the cam sensor twice now thinking it was the cam sensor the only thing I have noticed is that when taking the cam sensor out it has a very very small grove in it like its rubbing the gear behind the front cover any ideas?
any help or advice in the right direction would be appreciated
any help or advice in the right direction would be appreciated
I had the same problem, but when I swapped the wires it worked fine. it sounds to me like the wires from the harness aren't making a good contact with the sensor. I would look at the harness.
I have now just completely removed the harness and made the factory plug longer and it is still doing the same thing its really frustrating also can not get my shift light to work
