LS7 valve covers for shaft mounted rockers.
Thread Starter
10 Second Club
iTrader: (27)
Joined: Sep 2008
Posts: 2,229
Likes: 0
From: Lake Tapps, WA
LS7 valve covers for shaft mounted rockers. Anyone have suggestions on what valve covers fit shafted mounted rockers for LS7 heads? Thank You I appreciate your input.
I will be using Proform LS valve covers on my MAST LS7 heads and T&D shaftmounts. I just finish mocking them up and they seem to fit pretty well. I will know for sure after setting lash and turning the motor to make sure it clears the covers.
On The Tree
Joined: Dec 2004
Posts: 114
Likes: 0
From: Vancouver, WA.
Depending on which rockers you use, you may get away with just using a set of Yella Terra 3/8" valve cover gaskets. Hinson Motorsports has them and I used them to clear some Jesel Sportsmans.
Staging Lane
Joined: Oct 2009
Posts: 98
Likes: 1
From: Arizona
Try a company called "Innovators West" they're located somewhere in the midwest, can't remember but I needed extra clearance, ordered and delivered in the same week for $160...
wish i had a better picture but just got it out of the test cell therefore i still had tape on them to protect them.
wish i had a better picture but just got it out of the test cell therefore i still had tape on them to protect them.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Resident
Joined: Apr 2014
Posts: 985
Likes: 12
Teching In
Joined: Apr 2008
Posts: 5
Likes: 0
Katech valve covers will work.
That's what I use on my LS7 with shaft mounted rockers.
No spacers. Zero leaks.
Plus they have a great coil mounting system that goes with their valve covers if needed.
http://store.katechengines.com/valve...covers-c9.aspx
TonyG
That's what I use on my LS7 with shaft mounted rockers.
No spacers. Zero leaks.
Plus they have a great coil mounting system that goes with their valve covers if needed.
http://store.katechengines.com/valve...covers-c9.aspx
TonyG