Nick Williams 102 DBW question/problem
Thread Starter
Launching!
Joined: Jan 2008
Posts: 245
Likes: 0
From: Allen,TX.
Nick Williams 102 DBW question/problem So we have been having issues with the tune after installing a Fast 102 intake and new NW DBW 102 set up on my 436 LSX. The idle seems to hang on it and it acts like it has a vacuum leak so we smoke tested it and found that the throttle body leaks around the plug/socket and back set screw. Has anyone run into this problem and if so did it effect how it runs, are we chasing a non issue?
The car ran great(idled high) then ran like it lost the tune, maybe a bad ecm but not sure. It just started popping and wouldn't idle and would not start without a lot of peddle assistance, any idea's?
Thanks
Mike
The car ran great(idled high) then ran like it lost the tune, maybe a bad ecm but not sure. It just started popping and wouldn't idle and would not start without a lot of peddle assistance, any idea's?
Thanks
Mike
Might want to get with the vendor you purchased the TB from.
KW
TECH Fanatic
Joined: Sep 2005
Posts: 1,584
Likes: 23
From: NYC
There are a lot of problems with the NW 102 DBW throttle bodies; google it. The TPIS throttle body is much better, but hard to get. https://www.tpis.com/pages/8_10_11
